Toshiba e-STUDIO161 manual TWO-SIDED Copying Using the Bypass Tray, Copy original a

TWO-SIDED COPYING USING THE BYPASS TRAY

To perform manual two-sided copying, follow these steps.

Example: Copying originals A and B onto each side of one sheet of paper

Original A Original B Copy

1 Copy original A.

Copied original A Original A

Copied original A Original A

2 Place original B as shown below.

Vertically-oriented original:

If the original is oriented vertically, place it in the same orientation as original A.

Original B

Horizontally-oriented original:

If the original is oriented horizontally, place it with the top and bottom and left and right sides

Original Breversed with respect to the placement of original A.

3 Turn the copy of original A over, and without changing the position of the edge closest to you, insert it in the bypass tray.

Insert the paper all the way in.

	Copied
Original B	original A

	Copied
Original B	original A

•Copies made on the back side of paper Note should always be made one sheet at a

time using the bypass tray.

•Straighten curled or wavy paper before using it. Curled paper may cause misfeeds, creases, or a poor-quality image.

4 Select the bypass tray with the [TRAY

SELECT] key ( ), and then press the [START] key ().

The copy is delivered to the paper output tray.

26