Install a Support Platform in the Cabinet

Installation Specifications

Install a Support Platform in the Cabinet

Provide a platform (100 lb. load capacity) within the cabinet upon which the warming drawer will be supported. The platform must be installed level and straight. The top edge of the platform must be flush with the cutout at the front of the cabinet. There are no provisions to level the warming drawer after it has been installed. 3/4” (19 mm) thick plywood is recommended.

NOTE:

If the drawer is not installed in a level fashion, the drawer may slide open on its own or may not seal tightly, allowing heat to escape and resulting in poor warming drawer performance.

Chassis face

Support platform

Electrical Power Supply

Requirements

•The warming drawer is supplied with a power cord terminated by a three-prong plug. Plug it directly into a dedicated, grounded, three prong, electrical outlet. Do not use an extension cord.

Three-Prong Plug	Three-Prong
	Grounded Outlet

•The correct voltage, frequency and amperage must be supplied to the electrical outlet from a grounded, single phase circuit that is protected by a properly sized circuit breaker or time-delay fuse.

•The required voltage, frequency and amperage ratings are listed on the appliance data plate. The data plate is located inside the chassis drawer opening on the left side. Remove the drawer to expose it.

Nominal Electrical Supply Requirements

120 Vac, 60 Hz, 15 Amp. dedicated circuit

The warming drawer is supplied with a 40” (1016 mm) power cord with a three prong grounded plug.

Total Connected Load 0.5 kW (4 Amp.)

•If the power supply requirements shown above do not agree with those listed on the product data plate, use the requirements on the product data plate.

•It is the owner’s responsibility to ensure that the electrical outlet is installed by a qualified electrician. The electrical installation must comply with the latest revision of the National Electric Code ANSI/NFPA 70 and local codes and ordinances.

•If the electrical service provided does not meet the product specification, or does not conform to the NEC or local standards, do not proceed with the installation. Call a licensed electrician to correct the electrical service before proceeding.

•Be certain to locate the electrical outlet in an accessible location, so that the warming drawer may be easily unplugged in the event that service becomes necessary.

IWD30, IWD27, IWD24, EWD24, EWD27 specifications

Dacor has established a strong reputation for luxury cooking appliances, and among its standout offerings are the EWD30, MWDV30, MWDH27, MWDH30, and EWD36 models. These units exemplify Dacor’s commitment to blending innovative technology with elegant design, providing both functionality and style for the modern kitchen.

The EWD30 and EWD36 are premium wall ovens featuring Dacor’s proprietary technology that enhances cooking precision and efficiency. Both models come with a sleek design featuring a full-glass door that provides a clear view of your cooking progress. The innovative Dual-Sided Multi-Mode Convection system delivers even heat distribution, ensuring perfectly cooked meals every time. With a generous capacity, these ovens accommodate multiple dishes simultaneously, making them ideal for large family gatherings or entertaining guests.

The MWDV30 and MWDH30 microwaves are designed with convenience in mind. Utilizing Dacor's unique Speed-Cooking technology, these microwaves significantly reduce cooking time while preserving flavor and moisture. Both models feature an intuitive touch control interface and easy-clean stainless steel interiors, enhancing ease of use and maintenance. The MWDH30 model includes a built-in ventilation system, seamlessly integrating microwave functionality with kitchen design.

In addition to the standard microwave features, the MWDH27 boasts a comprehensive range of cooking modes, including sensor cooking and defrost functions, ensuring optimal results for all types of food. These microwaves also provide an option for custom cooking modes, allowing users to tailor settings to their specific culinary needs.

All models come equipped with Dacor’s signature control panel, which features illuminated knobs for effortless operation even in low light conditions. Smart technology allows for Wi-Fi connectivity, enabling users to monitor their cooking from their smartphones and receive alerts when meals are ready.

The overall aesthetic of these appliances complements Dacor’s luxury kitchen suite, offering stainless steel finishes and customizable options that allow for a cohesive kitchen design. With impressive capabilities, sleek designs, and innovative technology, the EWD30, MWDV30, MWDH27, MWDH30, and EWD36 stand as exemplary choices for those seeking top-tier kitchen performance. Each model not only enhances cooking efficiency but also elevates the overall kitchen experience.