5 - 38
CHAS
FRONT FORK
26.Tighten:
•Front fork cap bolt (locknut) 1
N
OTE:
•While compressing the fork spring, set the
thin type spanners 2 between the spacer 3
and spring guide 4.
•Hold the locknut 5 and tighten the front fork
cap bolt with specified torque.
T
R
.
.
29 Nm (2.9 m · kg, 21 ft · lb)
27.Install:
•Front fork cap bolt 1
To outer tube.
N
OTE:
Temporarily tighten the cap bolt.
28.Install:
•Protector guide 1
Installation
1. Install:
•Front fork 1
N
OTE:
•Temporarily tighten the pinch bolts (lower
bracket).
•Do not tighten the pinch bolts (upper bracket)
yet.
2. Tighten:
•Front fork cap bolt 1
3. Adjust:
•Front fork top end a
* For AUS, NZ and ZA
T
R
.
.
30 Nm (3.0 m · kg, 22 ft · lb)
Front fork top end (standard) a:
5 mm (0.20 in)
* 10 mm (0.39 in)