Yamaha WR250FM Rear Brake PAD Inspection and Replacement, Pad pin plug Nm 0.3 m kg, 2.2 ft lb

REAR BRAKE PAD INSPECTION AND REPLACEMENT

INSP

ADJ

•Install the pad pin plug B.

T .

R .

Pad pin plug:

3 Nm (0.3 m • kg, 2.2 ft • lb)

3.Inspect:

•Brake fluid level

Refer to “BRAKE FLUID LEVEL INSPEC- TION” section.

4.Check:

•Brake lever operation

A softy or spongy feeling → Bleed brake system.

Refer to “BRAKE SYSTEM AIR BLEED- ING” section.

REAR BRAKE PAD INSPECTION AND REPLACEMENT

1.Inspect:

•Brake pad thickness a

Out of specification → Replace as a set.

Brake pad thickness:

6.4mm (0.25 in) <Limit>: 1.0 mm (0.04 in)

2.Replace:

•Brake pad

Brake pad replacement steps:

•Remove the protector 1 and pad pin plug

2.

•Loosen the pad pin 3.

•Remove the rear wheel 4 and brake cali- per 5.

Refer to “FRONT WHEEL AND REAR WHEEL” section in the CHAPTER 5.

3 - 29