5 - 58
CHAS
SWINGARM
3. Install:
•Collar 1
To connecting rod 2.
N
OTE:
Apply the molybdenum disulfide grease on the
collar and oil seal lips.
4. Install:
•Connecting rod 1
•Bolt (connecting rod) 2
•Washer 3
•Nut (connecting rod) 4
To relay arm 5.
N
OTE:
Apply the molybdenum disulfide grease on the
bolt.
5. Install:
•Relay arm 1
•Bolt (relay arm) 2
•Washer 3
•Nut (relay arm) 4
To swingarm.
N
OTE:
•Apply the molybdenum disulfide grease on
the bolt.
•Do not tighten the nut yet.
6. Install:
•Swingarm 1
•Pivot shaft 2
N
OTE:
•Apply the molybdenum disulfide grease on
the pivot shaft.
•Insert the pivot shaft from right side.
7. Check:
•Swingarm side play a
Free play exists → Replace thrust bear-
ing.
•Swingarm up and down movement b
Unsmooth movement/binding/rough
spots → Grease or replace bearings,
bushings and collars.
T
R
.
.
80 Nm (8.0 m · kg, 58 ft · lb)
T
R
.
.
85 Nm (8.5 m · kg, 61 ft · lb)