Yamaha WR250FM service manual Install Trip meter cable

FRONT WHEEL AND REAR WHEEL CHAS

1

11.Install:

• Trip meter cable 1

Rear wheel

1.Install:

• Bearing (right) 1

• Circlip 2 New

•Spacer 3

•Bearing (left) 4

• Oil seal 5 New

NOTE:

•Apply the lithium soap base grease on the bearing and oil seal lip when installing.

•Install the bearing with seal facing outward.

•Use a socket that matches the outside diam- eter of the race of the bearing.

•Right side of bearing shall be installed first.

•Install the oil seal with its manufacture’s marks or numbers facing outward.

CAUTION:

Do not strike the inner race of the bearing. Contact should be made only with the outer race.

2.Install:

•Brake disc 1

•Bolt (brake disc) 2

T.R. 14 Nm (1.4 m · kg, 10 ft · lb)

NOTE:

Tighten the bolts in stage, using a crisscross pattern.

5 - 8