Yamaha WR250FM Battery REPLACEMENT/FUSE Inspection, Battery Replacement, Fuse Inspection

BATTERY REPLACEMENT/FUSE INSPECTION

INSP

ADJ

6.Install:

•Battery

•Battery band

7.Connect:

•Battery leads

(to the battery terminals)

CAUTION:

First, connect the positive lead 1, then the negative lead 2.

8.Check:

•Battery terminals

Dirt → Clean with a wire brush.

Loose connection → Connect properly.

9.Lubricate:

•Battery terminal

Recommended lubricant:

Lithium soap base grease

10.Install:

• Seat

BATTERY REPLACEMENT

1.Replace:

• Battery

CAUTION:

This battery is for YAMAHA WR250F.

After filling the battery with electrolyte, either charge it for at least 3 hours at the amperage specified on the battery or let it sit for at least 15 hours before using it.

EAS00181

FUSE INSPECTION

CAUTION:

To avoid a short circuit, always set the main switch to “OFF” when checking or replacing a fuse.

1.Remove:

•Seat

•Fuse cover

3 - 55