Yamaha WR250FM service manual Install Grip cap cover Cover throttle cable cap

HANDLEBAR CHAS

4.Install:

•Grip cap cover 1

•Throttle grip 2

NOTE:

Apply the lithium soap base grease on the throttle grip sliding surface.

5.Install:

•Throttle cables 1 To tube guide 2.

NOTE:

Apply the lithium soap base grease on the throttle cable end and tube guide cable wind- ing portion.

6.Install:

•Throttle cable cap 1

•Screw (throttle cable cap) 2

T.

R.

4 Nm (0.4 m · kg, 2.9 ft · lb)

WARNING

After tightening the screws, check that the throttle grip 3 moves smoothly. If it does not, retighten the bolts for adjustment.

7.Install:

•Grip cap cover 1

•Cover (throttle cable cap) 2

5 - 43