Yamaha WR250FM Replacing the Headlight Bulbs, Adjusting the Headlight Beams, Adjusting steps

REPLACING THE HEADLIGHT BULBS/ ADJUSTING THE HEADLIGHT BEAMS

INSP

ADJ

REPLACING THE HEADLIGHT BULBS

1.Remove:

•Headlight

Refer to “SEAT, FUEL TANK AND SIDE COVERS” section in the CHAPTER 4.

2.Remove:

•Headlight bulb holder cover 1

3.Detach:

•Headlight bulb holder 1

4.Remove:

•Headlight bulb 2

WARNING

Since the headlight bulb gets extremely hot, keep flammable products and your hands away from the bulb unit it has cooled down.

5.Install:

•Headlight bulb New

Secure the new headlight bulb with the headlight bulb holder.

CAUTION:

Avoid touching the glass part of the head- light bulb to keep it free form oil, otherwise the transparency of the glass, the life of the bulb and the luminous flux will be adversely affected. If the headlight bulb gets soiled, thoroughly clean it with a cloth moistened with alcohol or lacquer thinner.

6.Attach:

•Headlight bulb holder

7.Install:

•Headlight bulb holder cover

8.Install:

• Headlight T.R. 7 Nm (0.7 m · kg, 5.1 ft · lb)

Refer to “SEAT, FUEL TANK AND SIDE COVERS” section in the CHAPTER 4.

ADJUSTING THE HEADLIGHT BEAMS

1.Adjust:

• Headlight beam (vertically)

Adjusting steps:

•Turn the adjusting screw 1 in direction a or b.

Direction a	Headlight beam is raised.
Direction b	Headlight beam is lowered.

3 - 57