Yamaha WR250FM service manual Front brake master cylinder

FRONT BRAKE AND REAR BRAKE CHAS

ÈÉ

È

É

3.Install:

•Spring 1

To brake master cylinder piston 2.

NOTE:

Install the spring at the smaller dia. side.

ÈFront É Rear

4.Install:

[Front]

•Brake master cylinder kit 1

•Washer 2

•Circlip 3

•Brake master cylinder boot 4

To brake master cylinder 5. [Rear]

•Brake master cylinder kit 1

•Push rod 2

•Circlip 3

•Brake master cylinder boot 4 To brake master cylinder 5.

NOTE:

•Apply the brake fluid on the brake master cyl- inder kit.

•Apply the lithium soap base grease on the tip of the push rod.

•When installing the circlip, use a long nose circlip pliers.

ÈFront É Rear

Front brake master cylinder

1. Install:

• Brake master cylinder 1

• Brake master cylinder bracket 2

• Bolt (brake master cylinder bracket) 3

T9 Nm (0.9 m · kg, 6.5 ft · lb) . R.

NOTE:

•Install the bracket so that the arrow mark a face upward.

•First tighten the bolts on the upper side of the brake master cylinder bracket, and then

tighten the bolts on the lower side.

5 - 21