Yamaha WR250FM service manual Bolt rear frame lower

REAR SHOCK ABSORBER CHAS

2.Install:

•Bushing 1

•Collar 2

•Dust seal 3

NOTE:

•Apply the molybdenum disulfide grease on the bearing.

•Apply the lithium soap base grease on the bushing, collars and dust seals.

•Install the dust seals with their lips facing out- ward.

3.Install:

•Rear shock absorber

4.Install:

•Bolt (rear shock absorber-frame) 1

•Nut (rear shock absorber-frame) 2

T.

R.

56 Nm (5.6 m · kg, 40 ft · lb)

NOTE:

Apply the molybdenum disulfide grease on the bolt.

5.Install:

•Bolt (rear shock absorber-relay arm) 1

•Nut (rear shock absorber-relay arm) 2

T.

R.

53 Nm (5.3 m · kg, 38 ft · lb)

NOTE:

Apply the molybdenum disulfide grease on the bolt.

6.Install:

•Rear frame 1

•Bolt [rear frame (upper)] 2

T.

R.

32 Nm (3.2 m · kg, 23 ft · lb)

•Bolt [rear frame (lower)] 3

T.

R.

29 Nm (2.9 m · kg, 21 ft · lb)

7.Tighten:

• Screw (air filter joint) 1

T.

R.

3 Nm (0.3 m · kg, 2.2 ft · lb)

5 - 67