FRONT WHEEL AND REAR WHEEL CHAS

8.Tighten:

• Bolt (axle holder) 1

T.

R.

23 Nm (2.3 m · kg, 17 ft · lb)

NOTE:

Before tightening the bolt, fit the wheel axle to the axle holder by stroking the front fork sev- eral times with the front brake applied.

9.Install:

• Brake hose 1

T.

R.

10 Nm (1.0 m · kg, 7.2 ft · lb)

To brake hose holder 2.

NOTE:

Before tightening the bolt (brake hose holder), align the top a of the brake hose neck with the brake hose holder bottom b. Then pass the brake hose in front of the axle boss c and fit it into the hose groove d so that the brake hose does not contact the nut (wheel axle).

10.Install:

Brake hose cover 1

Washer 2

Bolt [brake hose cover (M8)] 3

T.

R.

16 Nm (1.6 m · kg, 11 ft · lb)

Bolt [brake hose cover (M6)] 4

T.

R.

7 Nm (0.7 m · kg, 5.1 ft · lb)

5 - 7

Page 234
Image 234
Yamaha WR250FM service manual Tighten Bolt axle holder