Yamaha WR250FM service manual Spec

CABLE ROUTING DIAGRAM

SPEC

×Pass the cylinder head breather hose on the inside of the radiator hose 1 and on the outside of

the radiator pipe (radiator hose 4). Make sure that the cylinder head breather hose does not go for- ward of the chassis.

ØPass the starter motor lead in front of the radiator hose 4.

ÙPass the clutch cable through the cable guide.

Ú Pass the wire harness on the outside of the neu- tral switch lead and AC magneto lead.

Û Fit the brake hose into the guides on the protector.

ÜPass the wire harness, clutch cable and light switch lead through the cable guide.

ÝFasten the AC magneto lead, neutral switch lead and light switch lead to the cable guide at their protecting tube with a plastic locking tie and cut off

the tie end.

ÞPass the carburetor breather hoses, carburetor overflow hose and coolant reservoir breather hose so that the hoses do not contact the rear shock absorber.

2 - 23