TRANSMISSION, SHIFT CAM AND SHIFT FORK

ENG

2.Install:

2nd wheel gear (28T) 1

4th wheel gear (25T) 2

3rd wheel gear (28T) 3

5th wheel gear (22T) 4

1st wheel gear (31T) 5

O-ring 6 New To drive axle 7.

NOTE:

Apply the molybdenum disulfide oil on the 1st, 2nd and 3rd wheel gears inner circum- ference and on the end surface.

Apply the molybdenum disulfide oil on the 4th and 5th wheel gears inner circumference.

Apply the lithium soap base grease on the O- ring.

3.Install:

Washer 1

Circlip 2 New

NOTE:

Be sure the circlip sharp-edged corner a is positioned opposite side to the washer and gear b.

Be sure the circlip end c is positioned at axle spline groove d.

4.Install:

• Collar 1

NOTE:

Apply the lithium soap base grease on the oil seal lip.

When installing the collar into the crankcase, pay careful attention to the crankcase oil seal lip.

4 - 104

Page 226
Image 226
Yamaha WR250FM service manual Eng