CLEANING AND STORAGE

EC1B0000

GEN INFO

CLEANING AND STORAGE

EC1B1000

CLEANING

Frequent cleaning of your machine will enhance its appearance, maintain good overall performance, and extend the life of many com- ponents.

1.Before washing the machine, block off the end of the exhaust pipe to prevent water from entering. A plastic bag secured with a rubber band may be used for this purpose.

2.If the engine is excessively greasy, apply some degreaser to it with a paint brush. Do not apply degreaser to the chain, sprock- ets, or wheel axles.

3.Rinse the dirt and degreaser off with a gar- den hose; use only enough pressure to do the job.

CAUTION:

Excessive hose pressure may cause water seepage and contamination of wheel bear- ings, front forks, brakes and transmission seals. Many expensive repair bills have resulted from improper high pressure detergent applications such as those avail- able in coin-operated car washers.

4.After the majority of the dirt has been hosed off, wash all surfaces with warm water and a mild detergent. Use an old toothbrush to clean hard-to-reach places.

5.Rinse the machine off immediately with clean water, and dry all surfaces with a soft towel or cloth.

6.Immediately after washing, remove excess water from the chain with a paper towel and lubricate the chain to prevent rust.

7.Clean the seat with a vinyl upholstery cleaner to keep the cover pliable and glossy.

8.Automotive wax may be applied to all painted or chromed surfaces. Avoid combi- nation cleaner-waxes, as they may contain abrasives.

9.After completing the above, start the engine and allow it to idle for several min- utes.

1 - 20

Page 36
Image 36
Yamaha WR250FM service manual Cleaning and Storage