Yamaha WR250FM service manual Brake master cylinder kit

FRONT BRAKE AND REAR BRAKE CHAS

ÈÉ

ÈÉ

2.Install:

•Brake disc cover 1

•Bolt (brake disc cover) 2

T.R. 7 Nm (0.7 m · kg, 5.1 ft · lb)

3.Install:

•Brake caliper 1

•Rear wheel 2

Refer to “FRONT WHEEL AND REAR WHEEL” section.

4.Tighten:

•Pad pin 3

T.R. 18 Nm (1.8 m · kg, 13 ft · lb)

5.Install:

• Pad pin plug 4

T.R. 3 Nm (0.3 m · kg, 2.2 ft · lb)

Brake master cylinder kit

1.Clean:

•Brake master cylinder

•Brake master cylinder kit Clean them with brake fluid.

2.Install:

•Brake master cylinder cup (primary) 1

•Brake master cylinder cup (secondary) 2 To brake master cylinder piston 3.

NOTE:

Apply the brake fluid on the brake master cylin- der cup.

WARNING

After installing, cylinder cup should be installed as shown direction. Wrong instal- lation cause improper brake performance.

ÈFront É Rear

5 - 20