ELECTRIC STARTING SYSTEM

ELEC

+

2

3

 

1

 

9

 

4

 

0 M

 

 

5

 

6

7

8

ELECTRIC STARTING SYSTEM

STARTING CIRCUIT CUT-OFF SYSTEM OPERATION

If the main switch is set to “ON”, the starter motor can only operate if at least one of the fol- lowing conditions is met:

The transmission is in neutral (the neutral switch is closed).

The clutch lever is pulled to the handlebar (the clutch switch is closed).

The starting circuit cut-off relay prevents the starter motor from operating when neither of these conditions has been met. In this instance, the starting circuit cut-off relay is open so current cannot reach the starter motor. When at least one of the above condi- tions has been met the starting circuit cut-off relay is closed and the engine can be started by pressing the start switch.

WHEN THE TRANSMISSION IS

IN NEUTRAL

WHEN THE CLUTCH LEVER IS

PULLED TO THE HANDLEBAR

1Battery

2Main fuse

3Main switch

4Starting circuit cut-off relay

5Start switch

6Diode

7Clutch switch

8Neutral switch

9Starter relay

0 Starter motor

6 - 8

Page 303
Image 303
Yamaha WR250FM service manual Electric Starting System, Starting Circuit CUT-OFF System Operation