CAMSHAFTS

ENG

2

1

REMOVAL POINTS

Camshaft

1.Remove:

Timing mark accessing screw 1

Crankshaft end accessing screw 2

2.Align:

T.D.C. mark With align mark.

Checking steps:

Turn the crankshaft counterclockwise with a wrench.

Align the T.D.C. mark a on the rotor with the align mark b on the crankcase cover when piston is at T.D.C. on compression stroke.

NOTE:

In order to be sure that the piston is at Top Dead Center, the punch mark c on the exhaust camshaft and the punch mark d on the intake camshaft must align with the cyl- inder head surface, as shown in the illustra- tion.

3.Remove:

Timing chain tensioner cap bolt 1

Timing chain tensioner 2

Gasket

4.Remove:

Bolt (camshaft cap) 1

Camshaft cap 2

Clip

NOTE:

Remove the bolts (camshaft cap) in a criss- cross pattern, working from the outside in.

CAUTION:

The bolts (camshaft cap) must be removed evenly to prevent damage to the cylinder head, camshafts or camshaft caps.

4 - 24

Page 146
Image 146
Yamaha WR250FM service manual Removal Points, Camshaft