Yamaha WR250FM Replacement steps, Oil filter element cover 10 Nm 1.0 m kg, 7.2 ft lb

ENGINE OIL REPLACEMENT

INSP

ADJ

1

4.Remove:

•Oil tank cap 1

•Oil filler cap 2

•Frame oil drain bolt 3

•Crankcase oil drain bolt 4

•Oil filter element drain bolt 5

Drain the crankcase and oil tank (frame) of its oil.

5.Remove:

•Lower engine bracket

•Oil hose clamp 1

•Bolt (oil hose) 2

•Oil hose 3

•Oil strainer (frame) 4

6.Inspect:

•Oil strainer (frame) Clogged → Blow.

7.If the oil filter is to be replaced during this oil change, remove the following parts and reinstall them.

Replacement steps:

•Remove the oil filter element cover 1 and oil filter element 2.

•Check the O-rings 3, if cracked or dam- aged, replace them with a new one.

•Install the oil filter element and oil filter ele- ment cover.

T .

R .

Oil filter element cover:

10 Nm (1.0 m • kg, 7.2 ft • lb)

3 - 16