Yamaha WR250FM service manual Install Torsion spring Stopper lever Bolt stopper lever

KICK SHAFT AND SHIFT SHAFT

ENG

EC4B5111

Stopper lever

1.Install:

•Torsion spring 1

•Stopper lever 2

•Bolt (stopper lever) 3

T.

R.

10 Nm (1.0 m · kg, 7.2 ft · lb)

NOTE:

Align the stopper lever roller with the slot on segment.

Shift guide and shift lever assembly

1.Install:

•Spring 1

•Pawl pin 2

•Pawl 3

To shift lever 4.

NOTE:

Apply the engine oil on the spring, pawl pin and pawl.

2.Install:

•Shift lever assembly 1 To shift guide 2.

3.Install:

•Shift lever assembly 1

•Shift guide 2

NOTE:

•The shift lever assembly is installed at the same time as the shift guide.

•Apply the engine oil on the bolt (segment) shaft.

4.Install:

• Bolt (shift guide) 1

T.

R.

10 Nm (1.0 m · kg, 7.2 ft · lb)

4 - 76