Yamaha WR250FM service manual Tire Pressure Check, Standard tire pressure KPa 1.0 kgf/cm2, 15 psi

TIRE PRESSURE CHECK/SPOKES INSPECTION AND TIGHTENING/WHEEL INSPECTION

EC36Q000

INSP

ADJ

TIRE PRESSURE CHECK

1.Measure:

•Tire pressure

Out of specification → Adjust.

Standard tire pressure:

100 kPa (1.0 kgf/cm2, 15 psi)

NOTE:

•Check the tire while it is cold.

•Loose bead stoppers allow the tire to slip off its position on the rim when the tire pressure is low.

•A tilted tire valve stem indicates that the tire slips off its position on the rim.

•If the tire valve stem is found tilted, the tire is considered to be slipping off its position. Cor- rect the tire position.

EC36S002

SPOKES INSPECTION AND TIGHTENING

1.Inspect:

•Spokes 1

Bend/damage → Replace. Loose spoke → Retighten.

2.Tighten:

•Spokes

T.

R.

3 Nm (0.3 m · kg, 2.2 ft · lb)

NOTE:

Be sure to retighten these spokes before and after break-in. After a practice or a race check spokes for looseness.

EC36T000

WHEEL INSPECTION

1.Inspect:

•Wheel runout

Elevate the wheel and turn it. Abnormal runout → Replace.

3 - 43