Yamaha WR250FM service manual Assembly and Installation Engine installation, Brake pedal

ENGINE REMOVAL

ENG

EC4M5000

ASSEMBLY AND INSTALLATION Engine installation

1.Install:

•Engine 1

Install the engine from right side.

•Pivot shaft 2

T.

R.

85 Nm (8.5 m · kg, 61 ft · lb)

•Engine mounting bolt (lower) 3

T.

R.

69 Nm (6.9 m · kg, 50 ft · lb)

•Lower engine bracket 4

•Bolt (engine bracket) 5

T.

R.

34 Nm (3.4 m · kg, 24 ft · lb)

•Engine mounting bolt (front) 6

T.

R.

69 Nm (6.9 m · kg, 50 ft · lb)

•Upper engine bracket 7

•Engine mounting bolt (upper) 8

T.

R.

55 Nm (5.5 m · kg, 40 ft · lb)

•Bolt (left engine guard) 9

T.

R.

23 Nm (2.3 m · kg, 17 ft · lb)

•Lower engine guard 0

•Bolt (lower engine guard) A

T.

R.

10 Nm (1.0 m · kg, 7.2 ft · lb)

NOTE:

Apply the molybdenum disulfide grease on the pivot shaft.

EC4M5211

Brake pedal

1.Install:

•Spring 1

•Brake pedal 2

• O-ring 3 New

•Bolt (brake pedal) 4

T.

R.

26 Nm (2.6 m · kg, 19 ft · lb)

•Clip 5

NOTE:

•Apply the lithium soap base grease on the bolt, O-rings and brake pedal bracket.

•Install the clip with its stopper portion a fac- ing inward.

4 - 89