FRONT FORK CHAS

Front fork cap bolt

1.Inspect:

Front fork cap bolt 1

O-ring 2

Air bleed screw 3 Wear/damage Replace.

EC555000

ASSEMBLY AND INSTALLATION Front fork assembly

1.Wash the all parts in a clean solvent.

2.Install:

Damper rod 1 To inner tube 2.

CAUTION:

To install the damper rod into the inner tube, hold the inner tube aslant. If the inner tube is held vertically, the damper rod may fall into it, damaging the valve inside.

3. Install:

• Copper washer 1 New

O-ring 2

Base valve 3 To inner tube 4.

4.Tighten:

Base valve 1

T.

R.

55 Nm (5.5 m · kg, 40 ft · lb)

NOTE:

Use a damper rod holder 2 to lock the damper rod 3.

Apply the LOCTITE® on the base valve thread.

Damper rod holder:

YM-1423/90890-01423

5 - 32

Page 259
Image 259
Yamaha WR250FM service manual Front fork cap bolt, Assembly and Installation Front fork assembly