HANDLEBAR CHAS

EC5B5000

1

b

L

R

90˚

c

3

ASSEMBLY AND INSTALLATION Handlebar

1.Install:

Handlebar 1

Handlebar upper holder 2

Bolt (handlebar upper holder) 3

T.R.

28 Nm (2.8 m · kg, 20 ft · lb)

NOTE:

The handlebar upper holder should be installed with the punched mark a forward.

First tighten the bolts on the front side of the handlebar upper holder, and then tighten the bolts on the rear side.

2.Install:

Left grip 1

Apply the adhesive to the handlebar 2.

NOTE:

Before applying the adhesive, wipe off grease or oil on the handlebar surface a with a lacquer thinner.

Install the left grip to the handlebar so that the line b between the two arrow marks faces straight upward.

3.Install:

Right grip 1

Collar 2

Apply the adhesive on the tube guide 3.

NOTE:

Before applying the adhesive, wipe off grease or oil on the tube guide surface a with a lacquer thinner.

Install the grip to the tube guide so that the grip match mark b and tube guide slot c

form the angle as shown.

5 - 42

Page 269
Image 269
Yamaha WR250FM service manual Assembly and Installation Handlebar