Yamaha WR250FM service manual Throttle Lubrication, HOT Starter Lever Adjustment

THROTTLE LUBRICATION/ HOT STARTER LEVER ADJUSTMENT

INSP

ADJ

THROTTLE LUBRICATION

1.Remove:

•Cover (throttle cable cap) 1

•Cover (grip cap) 2

•Throttle grip cap 3

2.Apply:

•Lithium soap base grease On the throttle cable end a.

3.Install:

•Throttle grip cap

•Screw (throttle grip cap)

T.

R.

4 Nm (0.4 m · kg, 2.9 ft · lb)

•Cover (grip cap)

•Cover (throttle cable cap)

HOT STARTER LEVER ADJUSTMENT

1.Check:

•Hot starter lever free play a Out of specification → Adjust.

Hot starter lever free play a: 3 ~ 6 mm (0.12 ~ 0.24 in)

2.Adjust:

• Hot starter lever free play

Hot starter lever free play adjustment steps:

•Loosen the locknut 1.

•Turn the adjuster 2 until free play a is within the specified limits.

•Tighten the locknut.

NOTE:

After adjustment, check proper operation of hot starter.

3 - 11