5 - 5
CHAS
FRONT WHEEL AND REAR WHEEL
EC595000
ASSEMBLY AND INSTALLATION
Front wheel
1. Install:
•Bearing (left) 1
•Spacer 2
•Bearing (right) 3
•Oil seal 4
N
OTE:
•Apply the lithium soap base grease on the
bearing and oil seal lip when installing.
•Use a socket that matches the outside diam-
eter of the race of the bearing.
•Left side of bearing shall be installed first.
•Install the oil seal with its manufacture’s
marks or numbers facing outward.
CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
2. Install:
•Brake disc 1
•Bolt (brake disc) 2
N
OTE:
Tighten the bolts in stage, using a crisscross
pattern.
T
R
.
.
12 Nm (1.2 m · kg, 8.7 ft · lb)
New
3. Install:
•Collar 1
N
OTE:
•Apply the lithium soap base grease on the oil
seal lip.
•Install the collar with their projection a fac-
ing the wheel.
4. Install:
•Trip meter gear unit 1
N
OTE:
•Apply the lithium soap base grease on the oil
seal lip of the trip meter gear unit.
•Make sure the two projections a in the
wheel hub are meshed with the two slots b
in the trip meter gear unit.
b
a
1
B