Yamaha WR250FM service manual Rear brake caliper

FRONT BRAKE AND REAR BRAKE CHAS

2.Install:

•Copper washer 1 New

•Union bolt 2

T.

R.

30 Nm (3.0 m · kg, 22 ft · lb)

WARNING

Always use new copper washers.

CAUTION:

Install the brake hose so that its pipe por- tion a directs as shown and lightly touches the projection b on the brake cali- per.

3.Install:

•Brake hose holder 1

•Brake caliper 2

•Bolt (brake caliper) 3

T.

R.

23 Nm (2.3 m · kg, 17 ft · lb)

NOTE:

Fit the brake hose holder cut a over the pro- jection b on the front fork and clamp the brake hose.

4.Tighten:

• Pad pin 4

T.

R.

18 Nm (1.8 m · kg, 13 ft · lb)

5.Install:

• Pad pin plug 5

T.

R.

3 Nm (0.3 m · kg, 2.2 ft · lb)

Rear brake caliper

1.Install:

•Pad support 1

•Brake pad 2

•Pad pin 3

NOTE:

•Install the brake pads with their projections a into the brake caliper recesses b.

•Temporarily tighten the pad pin at this point.

5 - 19