CLUTCH

ENG

3

1

ab

2

c

3. Bend the lock washer 1 tab.

4.Install:

Seat plate 1

Cushion spring 2

NOTE:

Install the seat plate with its chamfered por- tion a facing the clutch boss 3.

Install the seat plate so that it is not caught on the step b.

Install the cushion spring with the paint c facing out.

5.Install:

Friction plate 1 1

Clutch plate 1 2

Friction plate 2 3

Clutch plate 2 4

NOTE:

Install the clutch plates and friction plates alternately on the clutch boss, starting with a friction plate and ending with a friction plate.

Use the friction plates 1 for the first and final while paying attention to the difference in surface pattern.

Apply the engine oil on the friction plates and clutch plates.

Unlike the clutch plate 2, the clutch plate 1 has no surface gloss. Use the clutch plate 1 for the first while paying attention to the dif- ference in surface gloss.

6.Install:

Bearing 1

Washer 2

Circlip 3 New To push rod 1 4.

NOTE:

Apply the engine oil on the bearing and washer.

4 - 55

Page 177
Image 177
Yamaha WR250FM service manual Eng