Enterasys Networks G3G124-24P, G3G170-24 manual Table A-1 G3 Switch Specifications

A

Specifications

This appendix provides information about the following:

For information about...	Refer to page...
Switch Specifications	A-1
IOM Module Specifications	A-3
Torque Values	A-5
1-Gigabit Ethernet and 100Base-FXTransceiver (SFP) Specifications	A-9
10-Gigabit Ethernet Transceiver (XFP) Specifications	A-9
Console Port Pinout Assignments	A-10
Regulatory Compliance	A-10

Enterasys Networks reserves the right to change the specifications at any time without notice.

Switch Specifications

Table A‐1 provides the I/O ports, processors and memory, physical, and environmental specifications for the G3G124‐24, G3G124‐24P and G3G170‐24.

Table A-1 G3 Switch Specifications

Item	Specification
G3G124-24 and G3G124-24P
	Twenty-four 10BASE-T/100BASE-TX/1000BASE-T compliant ports
	with auto-sensing and auto-negotiation via RJ45 connectors. These
	ports also support 802.3af PoE connections on the G3G124-24P base
	unit (or when the optional PoE module is installed on the G3G124-24
RJ45 ports 1 through 24	base unit).
	Two ports that support optional Mini-GBICs 100BASE-FX, 1000BASE-
	LX/SX fiber-optic connections and 1000BASE-T copper connections.
	When an SFP transceiver (Mini-GBIC) in SFP port 23 establishes a
	link, RJ45 port 23 is disabled. When an SFP transceiver in SFP port 24
Combo SFP ports 23 and 24	establishes a link, RJ45 port 24 is disabled.

Enterasys G-Series Hardware Installation Guide A-1