Canon qy8-13az-000 service manual Ink absorber replacement

(6)Ink absorber replacement

1)At the time of an error indicating that the ink absorber is full, replace either the main or the borderless-print ink absorber according to the error message.

- When the main ink absorber is full:

Replace the absorber indicated by the blue frame in the photo below (component of QY5-0178). - When the borderless-print ink absorber is full:

Replace 2 absorbers in the red circle in the photo below and the platen ink absorber (components of QY5-0178).

The main ink absorber and the borderless-print ink absorber have separate counters respectively. After ink absorber replacement, reset the applicable ink absorber counter according to the replaced ink absorber. For details, see (7) Ink absorber counter setting.

2) Partial replacement of the main ink absorber

For the main ink absorber, the following replacement methods are available:

Replacement method	Difficulties	Ink absorber volume to be replaced
Partial replacement	Low	Approx. a half portion of the entire main
		ink absorber
Whole replacement	High	The entire main ink absorber

Print yield after

replacement Approx. 4,800 pages

Approx. 12,000 pages

After ink absorber replacement, set the ink absorber counter value according to the replacement method. See (7) Ink absorber counter setting, for details.

<How to perform the partial replacement>

Remove the rear cover (No. 1 in the photo) and the ink absorber cover (No. 2 in the photo) from the rear side of the machine, and replace a half portion of the main ink absorber (No. 3 in the photo).

(Time required: Approx. 4 min. including the operation check after replacement)

1-25