Maytag 16010061 service manual Drain Hose, Reverse the previous steps for replacement

DRAIN HOSE

The drain hose attaches to the pump and is routed through the lower rear wall of the cabi- net. The drain hose is protected externally by ashield.

R E M O V A L

1.Disconnect power to the unit.

2.Remove the four ¼" hex head screws se- curing the access panel to the rear wall of the cabinet.

3.Remove the ¼" hex head screw securing the drain hose shield. Remove shield.

4.With access into the machine compart- ment, spread a towel under the connec- tion of the drain hose to the pump. Loosen the clamp and remove the drain hose (Fig- ure 6-10).

5.Reverse the previous steps for replacement.

Drain Hose

Access

Cover

Figure 6-9

Clamp

Drain Hose

Figure 6-10

16008373-01	SECTION 6. WATER CARRYING COMPONENTS 6-6
	© 1998 Maytag Corporation