Maytag 16010061 service manual Vertical Switches Push Button

VERTICAL SWITCHES (Push Button)

R E M O V A L

Depress the tab at the top of the switch with a screwdriver to disengage the tab from the console. Pivot the switch away from the console to remove (Figure 4-5).

R E P L A C E M E N T

Align the rib on the bottom of the switch with the slot in the console. Pivot the switch up into the console until the tab engages the console securely. Check that the locating tabs on either side of the switch's lower alignment rib are in position to properly center and lock the switch into the lower part of the switch o p e n i n g .

HORIZONTAL SWITCHES (Push-to-Start)

R E M O V A L

Depress the locking tab on the switch to disengage it from the locking tab on the console. Pivot the switch from the console

(Figure 4-6).

R E P L A C E M E N T

Position one side into the console and pivot the other tab into the console and apply enough pressure to engage the tab into the console.

Locking Tab

Align the Center Rib on the bottom of the Switch with the Slot in the Cup on the Bottom of the Switch Opening on the Console

Locking Tab

S c r e w d r i v e r

	Pivoting		the
	Switch		Body, Lock
	it in at the Top of
Figure 4-5	the	Opening
	on	the	Console.

Locking Tab

Locking Tab

Carefully Depress

Locking Tab on

Switch to Disengage

From Console

Figure 4-6

1 6 0 0 8 3 7 3 - 0 1	SECTION 4. CONSOLE	4 - 2
©	1998 Maytag Corporation