©2001 Maytag Appliances Sales Company
2-1
16010486 (16008373-05)
Revised 02/01
Section 2. Washer Controls Overview

SECTION 2. WASHER CONTROLS OVERVIEW

The software for the MAH5500B and the MAH7500 is different than the MAH4000
washer. The new controls operate via a membrane pad on the MAH5500 and a touch
screen/membrane pad on the MAH7500 washer.

Features of MAH7500 (LCD Washer):

A membrane switch (keyboard) with a
LCD display and touch screen.
The user can select a delay start.
The wash/rinse temperatures and wash
cycles are remembered and based on
the previous fabrics type selected.
The control panel drives a heater located
in the sump.
The control displays the estimated time
remaining in the cycle.
The control panel detects hose reversal
and changes the fills as necessary.
The control panel stores codes to aid the
service person in diagnostics.
Figure 1

Features of MAH5500B (LED Washer):

A membrane switch (keyboard) with an
embedded LED display.
The user can select a delay start.
The wash/rinse temperatures and wash
cycles are remembered and based on
the previous fabric type selected.
The user can select another wash cycle
during the operation and the control will
determine the completion of the cycle.
The control panel displays the estimated
time remaining in the cycle
The control panel stores codes to aid the
service person in diagnostics.
The control panel detects hose reversal
and changes the fills as necessary.

BASIC CONTROL BOARD PHILOSOPHY FOR BOTH WASHERS: