Maytag 16010061 service manual General overview of Stain Cycle, Suds detection during stain cycle

Stain Cycle:

General overview of Stain Cycle:

1)Tumble in the “normal” tumble pattern until it has completed filling plus 3 minutes.

2)Tumble for an additional 15 minutes with a 6T/24P tumble pattern.

3)Return to selected tumble pattern and proceed with remainder of the wash time preselected.

4)Bleach fill and first rinse fill temperature will be the same as the wash fill temperature.

5)Rinse times (including fills) are now 5-1/2 minutes, 4 minutes, 4 minutes and 4-1/2 minutes.

6)The fourth rinse is forced, which would be warm if warm rinse selected. (Colors will not default to cold on the 4th rinse.)

The following is an example of a Stain Cycle:

Whites, Warm/Cold, Stain Cycle selected on timer, Extra Rinse not selected.

Cycle	Stain Cycle Option Switch	Stain Cycle Option Switch
Function	"Not selected"	"Selected"
	Fill Time	Fill Time
Fill/Wash	20 Minutes @ 7T/3P	3	Minutes @ 7T/3P
	(7T=7 second tumble, 3P=3 second	15 Minutes @ 6T/24P
	pause)	17 Minutes @ 7T/3P
Bleach/	2 Minutes	2	Minutes
Tumble
1st Rinse	2 Minutes Fill & Tumble	5-1/2 Minutes Fill & Tumble
2nd Rinse	2 Minutes Fill & Tumble	4	Minutes Fill & Tumble
3rd Rinse	2-1/2 Minutes Fill & Tumble	4	Minutes Fill & Tumble
4th Rinse		4-1/2 Minutes Fill & Tumble
Final Spin	6-1/2 Minutes	6-1/2 Minutes
Total Run	__________	_________
Time:	46 Minutes	74 Minutes

Suds detection during stain cycle:

1.Torque baseline is set during the first 3 minutes of Wash cycle after the washer is filled.

2.Suds detection is frozen during 15 minutes of the 6/24 tumble action during Wash/ Fill cycle.

3.Suds detection begins when cycle resumes the initial selected tumble pattern .

16010199 (16008373-03)	6
Revised 7/00	©2000 Maytag Appliances Sales Company