Maytag 16010061 service manual Input Water Temperature, Option Selected, Spin Speed Drain Pump

The water temperature entering the washer during rinse is tempered. The following table shows the temperature based on the user selections.

INPUT WATER TEMPERATURE

Extra Heavy, Quick,		Selected		Rinse	Stain	Rinse water
heavy, normal, or light		Temperature			Cycle	temperature
	Option Selected
	Y	H/C, W/C, and		N	N	Non-tempered cold.
		C/C
	Y	W/W		N	N	80°F for the final rinse
						only. Non-tempered cold
						for all other rinses.
	N	H/C, W/C, and		Y	N	Non-tempered cold
		C/C
	N	W/W		Y	N	All rinses 80 °F
	Y	H/C, W/C, and		N	Y	The first rinse is the
(heavy, normal, and light		C/C AND W/W				same as the wash
only, quick is not allowed						temperature. The rest of
with stain)						the rinses are the same
						as if stain cycle was not
						selected.
ON/OFF SEQUENCE OF PUMP DURING SPIN CYCLE
	Spin Speed			Drain Pump
	a) <540 rpm			On continuous
	b) <100 rpm when in redistribution.			Off
	c) >=540 rpm and during the first		15 second on and 15 second off
	minute			duty cycle.
	d) >=540 rpm and 30 seconds after		15 second on and 45 seconds off
	the machine has reached the target			duty cycle.
	speed.
	e) Coast down during final spin			Off until machine reaches 300 RPM
				and then on until the machine
				reaches 0 RPM.
	f) Coast down during all other spins			On continuous until next step in the
				cycle

16010486 (16008373-05)	Section 1. General Information	1-4
Revised 02/01	©2001 Maytag Appliances Sales Company