Maytag 16010061 Teardown & Wiring Information, Console Removal, Microprocessor Board Removal

SECTION 5. TEARDOWN & WIRING INFORMATION

Warning - Always shut off electrical power to the unit before beginning any ser- vice repair procedures.

The replacement console assembly consists of the console, medallion and membrane pad.

CONSOLE REMOVAL

1.Disconnect power to the unit.

2.Remove the four screws securing the console to the rear cover plate.

Figure 5-1

3.Lay a drop cloth across the top cover of the washer.

4.Grasp the top of the console and gently rock the top of the console forward away from the rear console back. Note the hooked tabs on bottom of the console, which engage the slots in the top cover.

5.For reinstallation, reverse the aforemen- tioned steps.

MICROPROCESSOR BOARD REMOVAL

1.Disconnect power to the washer.

2.Remove the console assembly.

3.Carefully remove the membrane pad harness and other wires from the mi- croprocessor board.

Figure 5-3

LCD MODEL

Figure 5-4

LED MODEL

Figure 5-2

16010486 (16008373-05) Section 5. Teardown & Wiring Information 5-1

Revised 10/00

©2001 Maytag Appliances Sales Company