USER INTERFACE |
| machine at night or some other time to | ||
SELECTIONS: (LED Washer) |
| better suit the needs of the household. |
| |
The user can select the setting of several | The consumer can select the time delay | |||
from 1 hour to 9 hours in increments of 1 | ||||
features while in the User Interface Active | ||||
hour. The user shall press the delay button | ||||
Mode or the Main Wash Cycle. The user | ||||
for each 1 hour increment. Holding down | ||||
sets the features by pressing a key on the | ||||
the delay wash key will advance through | ||||
keypad and the machine goes into the set | ||||
the one hour increments to off and start | ||||
mode. If the machine is in the main wash | ||||
over again. |
| |||
cycle, additional criteria may be applied |
| |||
The delay time (in hours) shall be shown | ||||
prior to changing the feature. The modes | ||||
to set a feature are: |
| in left digit and an ‘H’ (for hours) shall be | ||
|
| shown in the right digit of the display. |
| |
• Fabric Mode |
|
|
| |
• Temperature Mode |
| If delay wash has been selected, but Start/ | ||
• Cycles Mode |
| |||
| Pause has not been pressed to initiate it, | |||
• Delay Mode |
| |||
| then the Start/Pause LED will flash off and | |||
• Signal Mode |
| |||
| on to indicate that it must be pressed. |
| ||
• Options Mode |
|
| ||
| The Start/Pause key must be pressed to | |||
|
| |||
FABRIC MODE |
| initiate a delay wash cycle. Once it has |
| |
| been pressed, the Start/Pause LED will | |||
When a Fabrics key is pressed, the last | ||||
stay on constant and the time will begin to | ||||
cycle that was not a Quick, Rinse, or Spin | ||||
count down and the display will indicate | ||||
cycle, will be recalled. Each Fabrics key | ||||
hours of delay remaining. When one hour | ||||
(Cotton/Sturdy, Wrinkle Free, Delicates, | ||||
of the delay is reached, the time will be | ||||
Handwash, ) remembers the wash/rinse | ||||
shown in minutes in the two digits of the | ||||
temperature settings, max extract option, | ||||
display. |
| |||
extra rinse option, and wash settings. |
| |||
|
| |||
TEMPERATURE MODE |
| Note: If a regular cycle has been |
| |
| running for more than five seconds, the | |||
Four discrete wash/rinse temperature | ||||
delay wash key will be locked out. |
| |||
selections are provided, each with an |
| |||
|
| |||
associated LED. Up and down arrow keys | SIGNAL MODE |
| ||
are used to make the wash/rinse |
| |||
The volume level of the end of cycle |
| |||
selection. Holding down one of these |
| |||
signal is adjustable. The sound ranges | ||||
keys will advance at a rate of one level per | ||||
from “off” to “3” in increments of 1. The | ||||
half second. Wash/rinse selection will not | ||||
user will be able to select the plus (+) to | ||||
wrap around. |
| |||
| increase the volume level. The user will | |||
|
| |||
CYCLES MODE |
| be able to select the minus | ||
When a wash key is selected (heavy, | the volume level. When the user first |
| ||
presses either of these keys, the current | ||||
normal, light, quick, rinse, or spin), the | ||||
end of cycle signal will be demonstrated. | ||||
LED shall be lit and remain lit until another | ||||
Subsequent presses of either the plus or | ||||
wash cycle is selected. The wash LEDs | ||||
do not change during the wash cycle. | minus button within 5 seconds of the |
| ||
DELAY MODE |
| previous key press will increase or |
| |
| decrease one level. The new end of cycle | |||
The delay start option is primarily used | ||||
shall sound. |
| |||
when a person wants to run the washing |
| |||
| ||||
16010486 |
| Section 2. Washer Controls Overview | ||
|
| |||
Revised 02/01 | ©2001 Maytag Appliances Sales Company |
|