Husqvarna Automower manual Menu functions, •Proportion first, •Follow loop out

6. Menu functions

•Proportion first (3-1-6)

When you use two exit sectors: Specify a percentage to define on how many occasions the Automower should leave the charging station in sector 1.

To test the settings in Exit angles: State the value 100 % for Proportion first when sector 1 is to be tested. State the value 0 % for Proportion first when sector 2 is to be tested. Place Automower in the charging station and select the Test OUT (3-2-5)function. The mower will now leave the charging station directly according to the settings under Exit angles. Reset the Proportion first value when testing is finished. For more information about Test OUT (3-2-5), see page 57.

Follow loop (3-2)

These functions in this sub-menu are for situations when the mower needs to be guided to reach remote areas, to find the charging station more easily, and to control the mower's operating mode when it is following the loop. You will also find test functions here to see how different charge exit settings work and how the mower finds its way into the charging station.

•Follow loop out (3-2-1)

This function means that Automower can be set to follow the boundary wire away from the charging station to reach a more remote area of the garden. This function is very useful in gardens where the front and back are joined by a passage where the charging station cannot be placed.

When this function is activated Automower will follow the boundary wire away from the charging station in the set direction. It will start mowing when it reaches the area.

	Follow loop out
	Follow loop in
Exit angles
Follow loop	Corridor width
	Test IN
Garden shape

Advanced	Test OUT
	3-2-
	3-2
	3012-520

Automower from ™ 53