6. Menu functions
•Follow loop in
This function is used to control how Automower searches for the charging station.
Automower always starts the search for the charging station in an irregular search method. In some gardens this is not sufficient for the mower to quickly find the charging station. The search can then be epitomized using the Follow loop in function.
When the mower still can not find the charging station after a specific period of irregular searching, it also starts to search for the guide wire and after a further period also the boundary wire to follow one of them into the charging station instead. This time is stated in minutes, and delays searching for the guide wire and boundary wire.
The delay time can be adapted to the shape of the garden in the Follow loop in function.
Automower has a default delay setting of
7 minutes for the guide wire and 11 minutes for the boundary wire. A delay of 99 minutes means that the function is deactivated.
If both search methods are to be activated, it is possible for example to set 5 minutes for Guide delay and 9 minutes for Boundary delay.
Automower then searches irregularly for
5 minutes and then searches for the guide wire for 4 minutes. If by this time it has not found the wire, the mower will now search for both the boundary wire and guide wire.
If it is not suitable in the installation to follow the boundary wire, 99 minutes should be specified as the delay for the boundary wire.
It is of course possible to specify the same delay time for both the guide wire and boundary wire, e.g. 5 minutes. Automower then searches irregularly for 5 minutes and when it does not find the charging station, it continues to search either by following the guide wire or the boundary wire, depending on which one it reaches first.
Exit angles
Follow loop
Garden shape
Advanced
Follow loop out
Follow loop in
Corridor width
Test IN
Test OUT
Follow loop out
Follow loop in
Corridor width
Test IN
Test OUT
Boundary delay
Guide delay
Automower from | ™ 55 |
