Husqvarna manual 4.2Using the timer, Starting the Automower, Stopping the Automower, 4.Use

4.Use

4.2Using the timer

The lawn should not be cut too often to obtain the best mowing result. Use the timer function (see 6.4 Timer

(2)on page 49) to avoid a downtrodden lawn and to get the maximum life from your Automower.

For example, the quality of your lawn will improve if it is mown every other day instead of 12 hours each day. In addition, the grass benefits from resting completely during at least a three-day period once a month.

4.3 Starting the Automower

1.Press the STOP button to open the control panel cover.

2.Set the main switch to the ON position.

3.Enter the PIN code.

The default setting for the theft prevention function Time lock (4-1-2)on Automower is active. The function requires the PIN code to be stated each time the main switch is moved to the ON position when this is not done correctly the mower will stop mowing after the set number of days and will not start again until the correct PIN code has been entered. The function can be deactivated or changed as required. For more information about Time lock (4-1-2), see

page 60.

4.Close the cover.

The message Starting is shown on the display.

5 beeps are heard over 2 seconds when the blade disc starts.

4.4 Stopping the Automower

1.Press the STOP button.

The Automower stops, the blade motor stops and the control panel cover opens.

40 Automower from ™

3012-408

3012-388