Husqvarna Automower manual 1.3Symbols in the Operator’s Manual, Xxxxxx xxxxx xxxx xxxx xxxxx

1. Introduction and safety

1.3Symbols in the Operator’s Manual

These symbols can be found in the Operator’s Manual. Study them carefully so you understand their significance.

•Inspection and/or maintenance must be carried out with the main switch set to OFF.

•Always wear protective gloves when working with the mower’s underframe.

•Never use a high-pressure washer or even running water to clean the Automower.

•A warning box indicates a risk of personal injury exist, especially when the stated instructions are not followed.

•An information box indicates a risk of material damage exist, especially when the stated instructions are not followed. The box is also used where there is a risk of user error.

3012-288

3012-272

3012-271

WARNING

Xxxxxx xxxxx xxxx xxxx xxxxx xxx.

IMPORTANT INFORMATION

Xxxxxx xxxxx xxxx xxxx xxxxx xxx.

Automower from ™ 7