1. Introduction and safety
Transport
The original packaging should be used when transporting the Automower over long distances.
To safely move from or within the working area:
1.Press the STOP button to stop the mower.
If the stop protection, (see page 61) used to prevent theft, has been activated enter the first number of the PIN code.
You select the four digit PIN code when you start the mower for the first time, see page 34.
2.Move the main switch to the OFF position if you intend to carry the mower.
3.Carry the mower by the handle at the rear under the mower. Carry the mower with the top against your body.
Maintenance
WARNING
When the mower is turned upside down the main switch must always be set to the OFF position.
The main switch should be set to the OFF position during all work on the mower’s underframe, such as cleaning or replacing the blades.
•Inspect the Automower each week and replace any damaged or worn parts.
Check especially that the blades and blade disc are not damaged. Replace all blades and screws at the same time if necessary so that the rotating parts are balanced, see 8. Maintenance on page 70.
Automower from | ™ | 9 |
