Husqvarna Automower manual Installation, Important Information

3. Installation

11.Connect the guide wire to the boundary wire with the help of a solderless coupler:

•Insert the ends of the boundary wire in the right respective left-hand holes on the connector.

•Insert the end of the guide wire in the centre hole.

•Press down the button on the connector fully.

12.Staple down/bury the connector in the lawn.

IMPORTANT INFORMATION

The function of the guide wire varies depending on how the working area appears. It is therefore recommended to test the installation with the help of the function Test OUT (3-2-5), see page 57.

3012-675

38 Automower from ™