3. Installation
If you intend to bury the boundary wire:
•Make sure to place the boundary wire at least 0.5" and a maximum of 8" into the ground.
The boundary wire must not be crossed on the path to and from an island.
Laying the boundary wire in towards the charging station
The boundary wire can be routed in several different ways in towards the charging station. The best alternative is to route the wire completely outside the charging station, see alternatives 1 and 2 in the illustration. The wire can also be placed under the charging station plate as shown in alternative 3 in the illustration. However, the wire should not be placed outside alternative 3 because it can then be difficult for Automower to find the charging station.
When connecting to the charging station, the right end of the boundary wire should be guided into the
30 Automower from 
™
1. |
2. |
3. |
