Husqvarna Automower manual Menu functions, If a value of 20 % is specified for Area 1 and

6. Menu functions

Up to three remote areas can be activated: Area 1, Area 2 and Area 3. Three values need to be stated to activate an area:

•Direction

Specify to the right or left, depending on which direction the area lies from the charging station. The direction is set looking from the charging station in the approach direction of the mower. In the above example the direction is to the Left.

When a guide wire is installed the direction can be specified as the guide wire. The mower will then follow the guide wire instead of the boundary wire.

•Distance

Specify the number of meters along the boundary wire or guide wire from the charging station to the place in the remote area where the mower is to turn out from the boundary wire and start mowing irregularly.

Tip! Use the Test OUT (3-2-5)function (see page 57) to find out how far it is to the remote area. The distance, stated in meters, will appear on the mower display.

•Proportion

Specify a value for how often of the occasions Automower leaves the charging station it should follow the loop out to the remote area.

For example the value 20 % means that in 20 % of the occasions Automower leaves the charging station, it does it in the direction to the remote area. In the remaining 80 % of the occasions the mower leaves the charging station according to the setting made for its function Exit angles (3-1).

If a value of 20 % is specified for Area 1 and

10 % for Area 2, the remaining 70 % is allocated to the selection under Exit angles (3-1).

Follow loop out

Follow loop in

Corridor width

Test IN

Test OUT

3-2-1

Area 1

Area 2

Area 3

Direction

Distance

Proportion

Area 1

Area 2

Area 3

Direction

Distance

Proportion

Right

Left

Guide

54 Automower from ™