3. Installation

5.Cut off any surplus boundary wire. Cut 0.4" - 0.8" above respective connectors.

6.Press the connector onto the contact pin, marked A, on the charging station.

IMPORTANT INFORMATION

The right hand connector should be connected on the right hand contact pin on the charging station and vice versa.

7.Refit the cover on the charging station. Ensure the three guides on the charging station enter the right holes in the cover.

3.6 Checking the installation

Check the loop signal by looking to see what indication the green LED on the charging station is giving.

Steady light = the signal is okay.

Flashing once every other second = break in the loop and no signal found.

Flashing twice every other second = signal found, but the wire is probably damaged. Check all wire connections.

3012-265

3012-507

3012-270

3012-282

Automower from

33

Page 33
Image 33
Husqvarna Automower manual Checking the installation