Husqvarna Automower manual When Test IN 3-2-4 is used, the house icon, Menu functions

6. Menu functions

•Test IN (3-2-4)

The Test IN (3-2-4)function is used to test how	Follow loop out
Automower finds its way into the charging
station.	Follow loop in
	Corridor width
	Test IN
	Test OUT
	3-2-4
When the function is selected, the mower will
directly follow the boundary wire or guide wire,
depending on which one is found first, in to the
charging station. If there is a passage and the
mower can not run through it, the Corridor width
value is set too high.
The adjacent picture shows how an Automower
negotiates a passage when a value of 5 is set for
the Corridor width, but not when a value of 6 is
set.
IMPORTANT INFORMATION
When Test IN (3-2-4)is used, the house icon	3012-672
on the display will come on and the mower
will remain in the charging station. Press the
Home button to return to operations.

•Test OUT (3-2-5)

The Test OUT (3-2-5)function is used to try different charge exit settings and to find out how far it is from the charging station to a remote area.

To test the settings for Follow loop out (3-2-1):

•State the value 100 % for Proportion for the remote area to be tested. Place Automower in the charging station and select Test OUT (3-2-5). The mower will now leave the charging station directly according to the stated direction and start mowing after the stated distance. Reset the Proportion value when testing is finished.

Follow loop out

Follow loop in

Corridor width

Test IN

Test OUT

3-2-4

Automower from ™ 57