3. Installation
2.Slide in the ends of the boundary wire in the lowermost holes on the charging station and catch them in the uppermost holes.
The right hand wire end should be inserted in the right hand hole, and the left hand wire end in the left hand hole.
IMPORTANT INFORMATION
The boundary wire must not be crossed when connecting to the charging station. Therefore the right hand wire end must be connected to the right hand connector on the charging station and vice versa.
3.Place the cable ends in the connector:
•Open the connector.
•Place the wire in the connector grip.
4.Press the connector together using a pair of pliers. Press until you hear a click.
32 Automower from 
™
