(9) Service mode
Function
Service test print
-Model name
-Destination
-ROM version
-USB serial number
-Ink absorber counter value (ink amount in the ink absorber)
-Ink system function check result
EEPROM information print
-Model name
-Destination
-ROM version
-Ink absorber counter value (ink amount in the ink absorber)
-Print information
-Error information, etc.
EEPROM initialization
Procedures
See "Service mode operation procedures" below.
See "Service mode operation procedures" below.
See "Service mode operation procedures" below.
Remarks
Set a sheet of A4 or letter size paper.
For print sample, see
Set a sheet of A4 or letter size paper.
The following items are NOT initialized, and the shipment arrival flag is not on:
-USB serial number
-Destination settings
-Ink absorber counter value (ink amount in the ink absorber)
Ink absorber counter reset | See "Service mode operation procedures" |
| below. |
Destination settings | See "Service mode operation procedures" |
| below. |
Button and LCD test | See "Service mode operation procedures" |
| below. |
Ink absorber counter setting | See "Service mode operation procedures" |
| below. |
<Service mode operation procedures>
1)With the machine power turned off, while pressing the Stop/Reset button, press and hold the ON/OFF button. (DO NOT release the buttons). The Power LED lights in green to indicate that a function is selectable.
2)While holding the ON/OFF button, release the Stop/Reset button. (DO NOT release the ON/OFF button.)
3)While holding the ON/OFF button, press the Stop/Reset button 2 times, and then release both the ON/OFF and Stop/Reset buttons. (Each time the Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)
4)When the Power LED lights in green (and "CANON Idle" is displayed on the LCD), press the Stop/Reset button the specified number of time(s) according to the function listed in the table below, then press the ON/OFF button. (Each time the Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)
Time(s) | LED indication | Function |
0 times | Green (Power) | Power off |
1 time | Orange (Alarm) | Service test print |
2 times | Green (Power) | EEPROM information print |
3 times | Orange (Alarm) | EEPROM initialization |
4 times | Green (Power) | Ink absorber counter |
|
| resetting |
5 times | Orange (Alarm) | Destination settings |
|
|
Remarks
When the print head is not installed, the carriage returns and locks in the home position capped.
See
See
See "Ink absorber counter resetting procedures" below.
Press the Stop/Reset button the specified number of time(s) according to the destination.
