See Destination settings procedures below | Canon qy8-13az-000

			See "Destination settings procedures" below.
6 times	Green (Power)	Print head deep cleaning	Cleaning of both Black and Color
7 to 9 times	Orange at odd	Return to the menu selection
	numbers (Alarm)
	Green at even
	numbers (Power)
10 times	Green (Power)	Eject roller correction	Not used in servicing.
11 times	Orange (Alarm)	Return to the menu selection
12 times	Green (Power)	Button and LCD test	See "Button and LCD test procedures" below.
13 times	Orange (Alarm)	Ink absorber counter setting	See "Ink absorber counter setting procedures" below.
14 times or	Green (Power)	Return to the menu selection
more

Note: - If the Stop/Reset button is pressed 14 or more times, the Alarm LED (orange) or Power LED (green) lights steadily without any changes.

<Destination settings procedures>

In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the destination listed in the table below, and press the ON/OFF button.

Time(s)	LED indication	Destination
0 times	Green (Power)	No change of the destination
1 time	Orange (Alarm)	Japan
2 times	Green (Power)	Korea
3 times	Orange (Alarm)	US
4 times	Green (Power)	Europe
5 times	Orange (Alarm)	Australia
6 times	Green (Power)	Asia
7 times	Orange (Alarm)	China
8 times	Green (Power)	Taiwan
9 times or more	Orange (Alarm)	Return to the menu selection
Note: Confirm the model name and destination in service test print or EEPROM information print.
<Ink absorber counter	resetting procedures>

After replacement of the ink absorber, reset the applicable ink absorber counter.

1)Before replacement of the ink absorber, check the ink absorber counter value in EEPROM information print. See 3-4. Verification Items, (2) EEPROM information print.

2)In the ink absorber counter resetting mode, press the Stop/Reset button the specified number of time(s) according to the replaced ink absorber to set its counter to 0%, or 60% (for partial replacement).

Time(s)	Replaced ink absorber	Counter value
0 times	Main ink absorber	Reset to 0%
1 time	Borderless-print ink absorber	Reset to 0%
2 times	Both the main and borderless-print ink absorbers	Reset to 0%
3 times	A half portion of the main ink absorber (partial replacement)	Set to 60%

1-28

Image 33

Canon qy8-13az-000 service manual See Destination settings procedures below

Contents

Pixma MP510 Scope RevisionTrademarks Manual Outline II. Table of Contents Part 2 Technical Reference Adjustment MaintenancePeriodic maintenance Periodic replacement parts Product Life Customer MaintenancePrint head Ink tank target value Part 1 1. Maintenance Special ToolsSerial Number Location Operator Call Errors by Alarm LED Lit in Orange List of Error Display / IndicationPage Vbus Other Error Messages Low ink Restrictions on paper USB cable not connected Troubleshooting by Symptom When enlarged in the paper feed direction When enlarged in the carriage movement direction Part 1 2. List of Error Display / Indication After replacement At replacementRepair Part 1 3. Repair 3-1. Notes on Service Part Replacement Side cover L2 and front cover L removal Special Notes on Repair Servicing Side cover R2 and front cover R removal Main case removal Scanner flexible cable attachment Timing sensor unit cable wiring Power supply unit cable wiring Carriage unit flexible cable wiring Ink tube installation Platen link assembly Emblem removalPart 1 3. Repair 3-2. Special Notes on Repair Servicing Adjustment / Settings Paper feed motor adjustmentCarriage rail adjustment Front feeder paper feed roller cleaning Document pressure sheet adjustment Amount Part 1 3. REPAIR, 3-3 1 to Ink absorber replacement User mode Ink absorber counter setting Service mode See Destination settings procedures below Ink absorber counter value to be set % Part 1 3. Repair 3-3. Adjustment / Settings 6 to Verification Items Service test print Service test print sample Print sample Eeprom information print Part 1 3. Repair Verification Items Printed items Machine Transportation Part NEW Technologies Cleaning Mode and Amount of INK Purged Part 2 2. Cleaning Mode and Amount of INK Purged Normal Color Printing via Computer Print Mode Normal Grayscale Printing via Computer Borderless Printing via ComputerManual Duplex Printing via Computer Part 2 3. Print Mode Card / Camera Direct PrintingCopying FAQ Problems Specific to the MP510 and Corrective Actions To the table of contents To the top Part 2 4. FAQ Appendix Pixma MP510 Block Diagram J301 Print Head 1/3 Carriage Unit Signal name Function Connector Location and PIN LayoutSignal name Function Input Output Logic Board Assy J501 LF Encoder Signal name Function J503 Power Supply Unit Input / Output J502 Ink Sensor / Ink Tank Sensor Signal name FunctionJ505 Asfpe Sensors Signal name Function Input Output J507 Main Cam Sensor Signal name Function Input /Output J701 Carriage Motor Signal name Function J702 LF Motor Signal name FunctionJ703 Purge Unit Motor Signal name Function J704 Scanner Motor Signal name Function J801 Scanner Unit Signal name FunctionJ901 Memory Card Signal name Function Input Output J902 USB 2.0 I/F Signal name Function Input Output Card Slot Board J1 Logic Board Signal name Function Input / Output Smgnd J3 CompactFlash Signal name Function J301 Memory Card Board Signal name Function Input / Output J5 IrDA Board Signal name Function Input / Output Operation Panel Board J2 LCD Unit Signal name Function Input / Output Carriage Board Signal name Function Pixma MP510 Specifications Copy Scanner Dpof Direct printingPage Supported ink tanks Print head